Tiger PFY-A Series, User Manual

Page: 10 / 32

1
Before placing the main unit on
the power plate, remove its lid,
pour water into the main unit using a
separate container, and re-attach
the lid.
How to remove and re-attach the lid.
(Refer to p.11.)
Pour water up to a level below the “full water
level.” (Refer to p.7.)
2
Lead out the power cord from the
cutout in the power plate, place
the power plate on a flat surface,
and then place the main unit
securely on the power plate.
Check that the power switch is set to “OFF”.
3
Check that the dispense lock
button is at the “Locked” position.
If water is boiled with the dispense lock button
in pressed-down position, it will take longer for
the water to boil and steam may escape from the
spout causing scalds.
How to lock
Sounds heard when dispensing the hot water or
when removing or re-attaching the lid
The “rattling”sound is made by the valve (stopper valve)
that prevents the hot water from spilling out in the event
that the product has been tipped over.
How to adjust the length of the power cord
Adjust the length of the power cord by coiling the cord
around the bottom of the power plate, and lead it out
from the cutout in the power plate.
Lead the power cord out from the cutout.
Caution
● Do not fill the water directly into the product from a
faucet or place the product on a wet surface so that
its bottom becomes wet.
● Do not fill the water above “full water level” for boiling.
● Do not fill the water while the main unit is still in
place on the power plate. Doing so may cause
malfunction.
3
Boiling water and dispensing hot water
Do not pour or
splash water over
the power switch.
Pour the water
slowly.
OFF
Main unit
connection
area
Power plate
connection
area
“ Locked” status “ Unlocked” status
Color line
Cutout
Power Cord
Wind the power
cord around here.
Press
Color line
Click
“ Locked” status
The color line is no
longer visible.
Insert the main
unit straight
down onto the
power plate.