![background image](http://html.mh-extra.com/html/tiger/crystal/crystal_users-operation-manual_1114833003.webp)
This appliance is not connected to a combustion products evacuation device. It shall be installed
and connected in accordance with current installation regulations. Particular attention shall be given
to the relevant requirements regarding ventilation.
The gas cooker is designed for cooking and water boiling purpose. To avoid
accident, do
not
allow for towel or clothes to be dried on the gas cooker.
Keep the kitchen well ventilated and don’t put the gas cooker under strong blowing.
Avoid rubber gas tube from touching the surface of the gas cooker.
The type of gas tube should be oil-proof, heat and corrosion resistant, such as NBR.
Replace the aged gas tub timely to prevent from accident caused by gas leakage.
Ensure the gas cooker is looked after when in use, turn it off when going out or going to bed.
When gas leakage found. Immediately turn off the gas supply and open the doors and windows to
ventilate the room, Don’t turn on or turn off any electric switches before the gas completely
dispersed out of the room.
Keep hands off while gas cooker is in use or at the moment of unexpected flame out, since the
burner, lid and pan support are still hot.
In case cooking stuff overflow over burner, lid or water collector, clean them in time so that the gas
cooker can work properly.
Take special care: when artificial gas applied, clean the lids, flame holes, switch nozzles and gas
passage regularly(usually once a month) to remove the sediment of carbon and contamination,
which will make as way through and combustion steady.
Qualified gas regulator must be used.