Tiger 06090005, Parts Listing With Mounting And Operating Instructions

Page: 15 / 68

SAFETY
12/10 Safety Section 1-9
© 2010 Alamo Group Inc.
SAFETY
For your protection while operating or servicing equipment, wear relatively tight and belted
clothing to avoid entanglement in moving parts. Tie up and protect long hair that could
become entangled in machinery. Remove all jewelry including necklaces, rings and
watches which can get caught in machinery or on corners or edges of the equipment.
Serious injury can result from entanglement with the machinery.
(SG-42)
All Safety Shields, Guards and other safety devices including (but not limited to) -
Deflectors, Steel Guards and Gearbox Shields must be used and maintained in good
working condition. All safety devices should be inspected carefully at least daily for missing
or broken components. Missing, broken, or worn items must be replaced at once to reduce
the possibility of injury or death from thrown objects, entanglement, or blade contact.
(SSM-07)
Replace bent or broken blades with new blades. NEVER ATTEMPT TO STRAIGHTEN,
WELD, OR WELD HARDFACING ON BLADES SINCE THIS WILL LIKELY CRACK OR
OTHERWISE DAMAGE THE BLADE WITH SUBSEQUENT FAILURE AND POSSIBLY
CAUSE SERIOUS INJURY FROM THROWN BLADES.
(SGM-10)
Wear gloves and exercise care when handling blades. Blades are SHARP and can cause
lacerations to hands and other parts of the body if not safely handled.
(SSM-09)
Relieve hydraulic pressure prior to doing any maintenance or repair work on the Implement.
Place the Implement on the ground or securely block up, and turn off the engine. Push and
pull the Remote Cylinder lever in and out several times prior to starting any maintenance or
repair work.
(S3PT-09W)
Use care when swinging or extending the boom to maintain tractor stability and control.
(SBM-13W)
The Mower is designed for certain mowing applications and is rated to cut up to a specific
size vegetation (see Mower Standard Equipment and Specifications). DO NOT use this
mower to cut vegetation above the Mower's rated capacity or to cut any type of non-
vegetative material. Only operate this Mower on a properly sized and equipped Boat.
Operating this Mower in an application for which it is not designed and/or operating the
Mower with the wrong size boat can cause unstable conditions or equipment failure
resulting in possible serious injury or death.
(SGM-14W)
PARTS INFORMATION
Tiger mowers use balanced and matched system components for blade carriers, blades, cuttershafts, knives,
knife hangers, rollers, drivetrain components, and bearings. These parts are made and tested to Tiger specifi-
cations. Non-genuine "will fit" parts do not consistently meet these specifications. The use of “will fit” parts
may reduce mower performance, void mower warranties, and present a safety hazard. Use genuine Tiger
mower parts for economyand safety.
(SPTM-1)
SEE YOUR TIGER DEALER