6
3- Connecter la tringlerie de volet 2-5, la chape vissée sur le quick link.
(le guignol laiton est déjà collé d’usine).
Connect
fl
ap pushrod 2-5 with the matal clevis
already screwed in. (brass horn is already glued
into the wing at the factory).
4- Ajuster et coller le «chapeau» 2-41A.
Trial
fi
t, adjust, if necessary, and glue top cover
2-41A.
5- Ajuster la longueur de la tringlerie et y souder la chape.
Adjust length of the pushrod and sold the clevis.
6- Ajuster et fixer le cache servo 2-41A à l’aide de scotch cristal (non
fourni).
Trial
fi
t and sand if necessary servo cover 2-41A.
Fix it with clear tape (not furnished).
INSTALLATION TRINGLERIE VOLETS/ FLAPS LINKAGE INSTALLATION
2-5
Le guignol des volets est déjà installé
Flap horn already installed
2-41A
2-41A
