manualshive.com logo in svg

Tiger Technology Tiger Box 3U16, Assembly Manual, Page: 14 / 26

Share
Download
Tiger Technology Tiger Box 3U16 Assembly Manual Download Page 14

Tiger Box 3U16 Assembly Guide                                                                                                                                                                        

Hardware Monitoring:

14

Monitoring RAID Drives Activity

Note: 

To monitor RAID drives activity, you should remove the front panel bezel.

You can monitor the activity of the RAID drives using the LED indicators on the top 
of each HDD carrier:

Important: 

To diagnose RAID drive failure, it is advisable to regularly check 

the RAID status in the Storage page of Tiger Store’s web UI (refer to the Tiger 
Store Administration Guide). Degraded RAID status indicates that a drive has 

failed and needs to be replaced with the spare drive, following the steps described in 
“Replacing a Failed Drive” on page 16.

Monitoring Client Connectivity

You can monitor the connectivity of SAN/LAN clients using the LED indicators on the 
FC/10GbE/1GbE ports respectively.

FC ports

Your configuration can include 8Gb or 16Gb FC cards. The FC cards are set up to work 
in auto mode i.e. their ports transmit data depending on the connectivity mode of the 
client’s (or the switch’s) FC card. You can view the transmission mode through any FC 
port using the LED indicators above it. If the FC port LED’s light is off the port is 
inactive.

8Gb Cards

16Gb Cards

10 GbE Ports

You can view the status of your connection through a 10GbE port using the LED 
indicator above it.

IPMI port activity LED

green

blinking

there is activity on the 
IPMI port

-

-

offline or no activity

Appliance HDD LED

green

blinking

appliance flash drive 
activity

Power LED

green

solid

The system is operating 
and power is properly 
supplied to the system 
power units.

Indicator

LED color Status

Description

Activity LED blue

blinking

I/O activity

blue

solid

SAS RAID drive is idle

-

-

SATA RAID drive is idle

Status LED

red

solid

Drive failure

red

slow blinking
(once a second)

Drive is rebuilding.

red

two blinks 
followed by a 
pause

Drive operates as a hot spare.

Indicator

LED color

Status

Description

left

green

solid

2Gb mode

right

green

solid

4Gb mode

both

green

solid

8Gb mode

Indicator

LED color

Status

Description

left

green

solid

4Gb mode

right

green

solid

8Gb mode

both

green

solid

16Gb mode

Indicator

LED color

Status

Description

Summary of Contents for Tiger Box 3U16



























Reviews:

No comments