Tiger Box 1U8 Assembly Guide
Hardware Monitoring: Hardware Monitoring
18
1.
Plug one end of the cable into the network port of the appliance.
2.
Do one of the following:
•
Plug other end of the cable in the network port of the client computer.
•
Plug other end of the cable in the port of the Ethernet switch and then connect the
switch to the client computer's network port.
Note:
If you opt for interconnection via switch, refer to your switch documentation
for further setup instructions.
To connect a computer to the Admin port:
1.
Plug one end of the network cable provided in the shipment in the port with label
Admin port.
2.
Plug other end of the network cable in the LAN port of the computer, from which
you want to access the web interface.
Important:
The Admin port is designed solely as a safety net, allowing you to
access the web interface, when you have misconfigured the appliance’s network
identification and fail to access it from any computer.
Hardware Monitoring
Audible Alarm
The appliance sounds an audible alarm (beeping), in case of a power supply error - a
power module has failed or is not present. To confirm the problem, check the power
status LED on the front panel bezel (see “Monitoring the System Activity” on page 19).
Note:
The alarm continues beeping until the problem is resolved.
