BEFORE FIRST USE
Before use, remove all packaging and inspect the appliance for any damage. If there appears to be any damage,
please take the unit back to place of purchase for a replacement.
ASSEMBLY & USAGE INSTRUCTIONS
1. Attach the Mop head to the main body as followed in Figure 1. Insert the Swivel joint into the designated hole
in the main body until it locks in place, with the lock button on the main body (you will hear a clicking sound).
2. Insert the handle down into the body until it locks in place with the Lock Button on the main body (you will
hear a clicking sound) (Figure 2).
3. Place the Microfiber cloth pad onto the mop head.
4. Fasten the Microfiber cloth pad by pulling the cord while pressing on the toggle.
5. When using the steam mop on carpets, place the mop head (with microfiber cloth) over the carpet glider.
NOTE:
Do not operate without either Microfiber cloth in place.
6. Hold the mop at a 45° angle, open the water tank cover and add the water in the tank (figure 4).
L
M
N
Figure 1
Figure 2
Figure 3
Figure 4
