USING YOUR HAIR BRUSH STRAIGHTENER:
•
Do not use on greasy, dirty, sweat hair. Before use, the hair should be wash, dried and combed.
•
Use only on healthy hair.
1. Start the hair brush straightener from dividing the hair into equal strands, about 5cm wide and 5mm thick.
2. Start from the back of the head and from the lower strands.
3. Comb your hair from top to bottom.
4. Be careful do not touch the hot tips with hands or scalp.
5. Repeat step all over the head until you achieve the desired effect.
6. The speed of moving the straightening brush should be fitted to the character and quality of the hair. Thin hair
needs shorter time of straightening than thick hair.
7. Allow the hair to cool, and then comb the strands.
8. Turn off the device by pressing and holding the switch (4) for 2 seconds; the LED indicator will go off. Then
plug off from the power socket.
9. Allow the unit to cool.
10.
After each use, clean the device according to the instructions included in section “CLEANING &
MAINTENANCE”.
CLEANING AND MAINTENANCE:
•
Turn your hair brush straightener off after use. Always turn the power OFF and remove the plug from power
outlet before cleaning.
•
Allow the unit to cool down first before cleaning.
•
Do not immerse the appliance in water or any other liquid.
•
To clean the exterior, simply wipe over with a dampened cloth and wipe dry.
•
Do not wind the power cord around the unit as this may strain and damage the wiring.
•
Do not use liquid or aerosol cleaners.
•
Do not use solvents, strong detergents and sharp objects; as they may damage the housing of the device.
•
The brush should be thoroughly cleaned off any hair.
SPECIFICATIONS:
Model
Description
Voltage
Frequency
Wattage
THB230
Hair Brush Straightener
220-240Vac
50Hz
65W
CUSTOMER SERVICE:
Australian Customer Service
GAF Control (Sales) Pty Ltd
P.O Box 19
Altona North Victoria 3025
Phone: 1300 659 489
Hours: 9am-5pm (EST) Mon-Fri
*This product may vary slightly to the product illustrated due to ongoing product development.
