•
After use, do not wrap the cord around the appliance as in time this may cause the cord to fracture. Coil cord
loosely by side of the appliance in storage.
•
For additional protection, the installation of a residual current device (RCD) with a rated operating current not
exceeding 30mA is advisable in the electrical current supplying the bathroom. Ask your electrician for advice.
•
Before cleaning, always turn the appliance off, switch off at the power outlet, and unplug at the power outlet.
Allow the appliance to completely cool before undertaking any cleaning.
•
Do not place an appliance on or near a hot gas flame, electric element or on a heated oven.
•
Do not place on top of any other appliance.
•
Do not leave appliance unattended when plugged in or switched on.
•
Use this appliance only for its intended use and described in this instruction booklet.
•
Take care to avoid the hot surfaces of the appliance coming into direct contact with the skin, in particular the
eyes, hands, ears, face and neck.
•
This appliance is not intended for commercial use.
FEATURES:
1. Main Unit
2. Rubber tips
3. Ceramic coating
4. ON/OFF Switch
5.
Temperature Switch ‘-‘
6.
Temperature Switch ‘+’
7. LCD Indicator Display
8. Rotating Power Cord
BEFORE USE:
Before use, remove all packaging and inspect the appliance for any damage. If there appears to be any damage,
please take the unit back to place of purchase for a replacement.
Read these instructions before use.
OPERATING YOUR HAIR BRUSH STRAIGHTENER:
1. Plug the device into main supply.
2. Turn on the device by pressing and holding the switch (4) for 2 seconds.
3. The LCD display will light up and show the temperature. After switching on, within about 2 minutes the device
will automatically heat up to 180°C.
4. Set the appropriate temperature adapted to the thickness and quality of straightened hair from 80°C - 230°C.
•
Thin and delicate hair: 170°C - 200°C.
•
Standard hair: 190°C - 210°C.
•
Thick and strong hair: 210°C - 230°C.
5. Setting the temperature: the brush automatically heats up to 180°C. In order to decrease the temperature, you
should press the temperature switch ‘-‘ (5) until the display shows the required value.
6.
In order to increase the temperature, you should press the temperature switch ‘+’ (6) until the display shows
the required value.
Note: Please exercise care when using any electrical appliance
