Pag 22 di 25
Home Automation Area
LAYOUT MENU ALGORITHM PARAMETER REGULATION
•
Regulation constant (self-learning algorithm) (0,5..6,5),
“K REG”
message. By pushing the
UP
and
DOWN
buttons you can set a value and vary that according to the data processed by the algorithm.
A high value makes the temperature rise within the heating circuit (depending on the external
temperature).
•
Parameter building size for regulation (1..10),
“BUILD”
message. The
UP
and
DOWN
buttons allow
the value setting. A high value is associated with a building/heating system with a high temperature
inertia (i.e.: large rooms with slow systems), otherwise a low value is associated to small rooms or
systems with low temperature inertia (convector heaters).
•
Functioning (self-learning function),
“YSELF”
message. By pushing the
UP
and
DOWN
buttons you
can set a value. “0” indicates non-functioning, whereas “1” indicates functioning.
•
Functioning (anti-frost function),
“NOFR*”
message. By pushing the
UP
and
DOWN
buttons you can
set a value. “0” indicates non-functioning, whereas “1” indicates functioning.
5
1
12
9
1
2
18
0
3
6
PUSH THE
IP
BUTTON
AND KEEP IT PUSHED
FOR 3 SECONDS TO
ENTER INTO
INFO
MODE
PUSH THE
OK
BUTTON TO CHANGE FROM
ONE MENU TO ANOTHER
BY PUSHING THE
UP
/
DOWN
BUTTONS YOU CAN SET THE
VALUE
PUSH THE
OK
BUTTON TO CHANGE FROM
ONE MENU TO ANOTHER
PUSH THE
OK
BUTTON TO
CHANGE FROM ONE MENU TO
ANOTHER
PUSH THE
OK
BUTTON TO CHANGE FROM
ONE MENU TO ANOTHER
PUSH THE
UP
/
DOWN
BUTTONS
TO
ENABLE
1
OR DISABLE
0
PUSH THE
UP
/
DOWN
BUTTONS TO ENABLE
1
OR
DISABLE
0
BY PUSHING THE
UP
/
DOWN
BUTTONS YOU CAN SET THE
VALUE
PUSH THE
IP
BUTTON TO EXIT
AND RETURN TO RUN MODE
PUSH THE
UP
/
DOWN
BUTTONS TO
ENABLE
1
OR DISABLE
0
PUSH THE
OK
BUTTON TO CHANGE FROM
ONE MENU TO ANOTHER
