Pag 19 di 25
Home Automation Area
INFORMATION AND ADVANCED SETUP MENU
To enter into Information and Advanced setup mode press the
IP
button for at least 3 seconds, the
“INFO”
message will be shown on the LCD and you are then in INFO mode. To exit the INFO mode, briefly press the
very same button. To change from one menu to another, just press the
OK
button. As the large flashing
figures appear on the LCD, by pressing the
UP
and
DOWN
buttons it is possible to modify the value linked to
the displayed parameter (layout). If the parameter is not administered by the card in the central heating
connected to Easy by B&P, some dashes will appear in place of the value (“- -“).
INFORMATION CENTRAL HEATING CIRCUIT MENU
0
2
1
8
1
21
15
6
3
9
PUSH THE
IP
BUTTON AND
KEEP IT PUSHED FOR 3
SECONDS TO ENTER INTO
INFO
MODE
PUSH THE
OK
BUTTON TO
ENTER INTO NEXT
INFORMATION MENU
PUSH THE
OK
BUTTON TO
ENTER INTO NEXT
INFORMATION MENU
PUSH THE
OK
BUTTON
TO ENTER INTO NEXT
INFORMATION MENU
PUSH THE
OK
BUTTON TO
ENTER INTO NEXT
INFORMATION MENU
PUSH THE
OK
BUTTON
TO ENTER INTO NEXT
INFORMATION MENU
PUSH THE
IP
BUTTON TO
EXIT AND RETURN TO
RUN MODE
PUSH THE
UP
/
DOWN
BUTTONS TO SET THE
LIMIT TEMPERATURE
