Before use, the battery compartment must be
closed.
The voltage tester may only be dismantled by
authorised personnal.
Before using the device check the housing and
connecting line for visible damage. If damages
are visible the voltage tester may not be placed into
operation. In case of strong dirt contamination, the
tester must be cleaned before use.
The tester has to be stored in a clean and dry
environment.
3. Putting into operation
3.1 Battery
The instrument is already supplied with batteries.
The battery status is indicated by a battery symbol
on the display (see section 7.1).
3.2 Preparation
Remove the protective cap from the electrodes.
Push the handle with the test tip L1 upwards and
detach it from the display part.
For tests on shock-proof sockets, the handle on the
display part can remain locked, for other tests as
well as the self-test, it must be separated.
21
pull
