B. Connect the upper brine filter
,
or
upper distributor
,
to bottom of control valve, line up slots
and twist
, as shown below
C. Center
the riser pipe within the resin tank
D.
Attach the control valve onto the resin tank, ensuring the upper distributor slides over the riser
pipe
E.
Ensure the control valve is properly seated by securely tightening it clockwise into the resin tank
this only requires hand tightening
IF you are installing the supplied bypass valve go to step 3, if you are not installing bypass valve go to
Step 2 – note you will have extra parts based on w
hich
method you select
Step 2: Connecting control valve input and output connections with flow meter
A. Insert washers, from parts bag B, into input and output connections on the control valve
,
as shown below
B.
Locate quick release fittings supplied in control valve box
C.
Lightly coat the O-
R
ings on quick release fittings with
lubricant
connect them into the
bypass
valve connectors. Note: fitting containing on-board water meter probe dock must be
installed on the water outlet connection
, as shown below
7
ASSEMBLY
INSTRUCTIONS
