-
5
-
-
6
-
Hot air frying
1.Connect the mains plug into an earthed wall socket.
2.Carefully pull the pan out of the Hot-air fryer.
3. Put the ingredients in the basket.
Note: Never fill the basket in full or exceed the recommended
amount (see section ‘Settings’ in this chapter), as this could
affect the quality of the end result.
4. Slide the pan back into the Hot-air fryer.
Never use the pan without the basket in it.
If the pan doesn’t be fixed into the air fryer properly, the
appliance won’t work!
Caution: Do not touch the pan during and some time after use,
as it gets very hot. Only hold the pan by the handle.
5.Determine the required preparation time for the ingredient ( see
section ‘Settings’ in this chapter).
6.To switch on the appliance, turn the timer knob to the required
preparation time.
7.Turn the temperature control knob to the required temperature. See
section ‘Settings’ in this chapter to determine the right temperature.
Add 3 minutes to the preparation time when the appliance is cold.
Note: If you want, you can also let the appliance preheat
without any ingredi- ents inside. In that case, turn the timer
knob to more than 3 minutes and wait until the heating-up light
goes out ( after approx. 3 minutes). Then fill the basket and
turn the timer knob to the required preparation time.
a.The power-on light and the heating-up light go on.
b.The timer starts counting down the set preparation time.
c.During the hot air frying process, the heating-up light comes on
and goes out from time to time. This indicates that the heating
element is switched on and off to maintain the set temperature.
d.Excess oil from the ingredients is collected on the bottom of the pan.
8.Some ingredients require shaking halfway through the preparation
time. To shake the ingredients, pull the pan out of the appliance by
the handle and shake it. Then slide the pan back into the I fryer.
1.Remove all packaging materials
2.Remove any stickers or labels from the appliance
3.Thoroughly clean the basket and pan with hot water, some wash-
ing-up liquid and a non-abrasive sponge.
Note: You can also clean these parts in the dishwasher.
4.Wipe inside and outside of the appliance with a moist cloth.
This is an oil-free fryer that works on hot air, Do not fill the pan
with oil or frying fat.
BEFORE FIRST USE
1. Place the appliance on a stable, horizontal and level surface.
Do not place the appliance on non-heat-resistant surfaces.
2. Place the basket in the pan properly
3. Put the pan into the machine.
Note: the pan MUST be put into the appliance properly, other-
wise the appliance doesn’t work!
4. Pull the mains cord and plug into the earthed wall socket.
Do not fill the pan with oil or any other liquid.
Do not put anything on top of the appliance.
Do not put anything on the air-inlet on the two sides of the
appliance, this disrupts the airflow and affects the hot air
frying result.
The oil-free can prepare a large range of ingredients. The recipe
booklet included helps you get to know the appliance. Pls refer to
the section “settings” table hereinafter
and the using guidance
figures at last page.
PREPARING FOR USE
USING THE APPLIANCE