MAINTENANCE AND OPERATION MANUAL
TIBC-10 011.1255-00
Tideland Signal Corporation
Page 13 of 14
0111255-00REVA_TIBC-10MANUAL20SEPT11.doc
•
Check the interconnecting cables between the TIBC-10, the batteries, and the load to
make sure that the insulation is in good condition and that the cables are not located in a
position where they are likely to be cut or broken.
•
Check the TIBC-10 to make sure there is no water in the enclosure and there is no
corrosion on the terminals.
3.2 Field
Service
The charger itself is not serviceable in the field. The charger can be replaced in the field (see
Figure 7 Exploded Diagram).
Please be sure that the charger is configured correctly for the battery it is to charge. Please check
that the circuit breaker is pushed-in and the output fuse is good.
