MAINTENANCE AND OPERATION MANUAL
TIBC-10 011.1255-00
Tideland Signal Corporation
Page 6 of 14
0111255-00REVA_TIBC-10MANUAL20SEPT11.doc
2.
Installation and Operation
2.1
Installation
Mounting hole locations and sizes are shown in Figure 2 Mounting Dimensions.
Before beginning the installation, make sure that the input and output settings meet your
particular requirements. The TIBC-10 is set at the factory according to the sales order. All
settings are marked on a label. An example label is shown in Figure 3 Configuration Label.
Figure 1 TIBC-10 Charger Panel View shows the overall layout inside the TBC-10.
If settings need to be changed, refer to section 2.4 Adjustment.
Figure 3 Configuration Label
Once you have confirmed that the input and output voltages meet requirements, you may connect
the batteries and the input power to TB1. TB1 is shown in Figure 4 TB1 Details. Connect the
battery negative to TB1-20 and battery positive to TB1-22.
