Tico Pro-Spotter, Service Manual

Page: 74 / 211

4-6 Service Manual
TICO Manufacturing
ENGINE PRO-SPOTTER
CHARGE AIR COOLER
Removal
See Figures 4-9, 4-10, and 4-11.
1. Park and prepare tractor for service. (See “Park
Tractor Safely” on page 1-3.)
2. Raise cab.
3. Remove brush guard. (See “FRONT COVERS AND
GUARDS” on page 14-3.)
Figure 4-9: Charge Air Cooler (CAC) Removal
4. Remove U-bolt (3), bracket (7), washers (5), and lock
nuts (6).
5. Disconnect tubes (4 and 8). Close all openings using
caps and plugs.
Figure 4-10: Charge Air Cooler (CAC)
(shown removed for clarity)
6. Remove cap screws (22) and covers (13).
NOTE
Condenser lines do not need to be removed.
7. Remove cap screws (14), washers (15), and lock
nuts (16) and set condenser (17) aside.
8. Remove cap screws (20), washers (19), lock nuts
(18), and shield (21).
1 Hose Clamp (4 used) 5 Washer (2 used)
2 Hump Hose (2 used) 6 Lock Nut (2 used)
3 U-Bolt 7 Bracket
4 Charge Air Cooler Tube
(left side) 8 Charge Air Cooler Tube
(right side)
TPS-052
4
8
2
3
7
2
1
5
6
1
13 Cover (2 used) 19 Washer (4 used)
14 Cap Screw (4 used) 20 Cap Screw (2 used)
15 Washer (4 used) 21 Shield
16 Lock Nut (4 used) 22 Cap Screw (6 used)
17 Condenser 25 Charge Air Cooler (CAC)
18 Lock Nut (2 used)
TPS-051
22
15
14
13
22
16
17
25
22
21
20
19
18