Tico Pro-Spotter, Service Manual

Page: 75 / 211

PRO-SPOTTER ENGINE
TICO Manufacturing
Service Manual 4-7
Figure 4-11: Charge Air Cooler Cap Screws
9. Remove cap screws (23) and charge air cooler
(CAC) (25).
Inspection
• Check CAC for cracks, holes, or other damage.
Replace parts found to be unserviceable.
• Inspect CAC piping, hoses, fittings, and clamps for
leaks, holes, cracks, and loose connections. Replace
parts found to be unserviceable.
• Clean all parts of dirt and debris.
Installation
Installation is reverse of the removal procedure.
COOLING FAN
Removal
See Figures 4-12, 4-13, and 4-14.
1. Park and prepare tractor for service. (See “Park
Tractor Safely” on page 1-3.)
2. Raise the cab.
3. Disconnect battery cables. (See “BATTERY” on
page 3-3.)
Figure 4-12: Charge Air Cooler (CAC) Tube Removal
4. Remove U-bolt (3), bracket (7), washers (5), and lock
nuts (6).
5. Disconnect tubes (4 and 8). Close all openings using
caps and plugs.
23 Cap Screw (2 used) 25 Charge Air Cooler (CAC)
24 Transmission Cooler
TPS-055
25
24
23
1 Hose Clamp (4 used) 5 Washer (2 used)
2 Hump Hose (2 used) 6 Lock Nut (2 used)
3 U-Bolt 7 Bracket
4 Charge Air Cooler (CAC)
Tube (left side) 8 Charge Air Cooler (CAC)
Tube (right side)
TPS-052
4
3
7
2
1
5
6
1
2
8