2
YOUR TICAD GOLDFINGER
IN DETAIL
1 Twist-grip control
2 Drawbar leather handle
3 Single button
4 Umbrella adapter
5 Drawbar
6 Top firm-fix connection
7 Top bag holder
8 Fastening straps
9 Centre bar
10 Centre firm-fix connection
11 Motor bar
12 Sliding sleeve
13 Drive wheel made of GRP*
14 Battery connection
15 Bottom firm-fix connection
16 Battery holder (concealed)
17 Bottom bar
18 Bottom bag holder
19 Front shaft
20 Knurled sleeve
21 Front wheel made of GRP*
SETTING UP YOUR TROLLEY
Frame connections (firm-fix connections):
The frame of your TiCad trolley is assembled with firm-fix connec-
tions. To connect two frame sections, simply press them into one
another and slightly turn one of the sections to allow the coupling
system to engage (1+2). It will have engaged once the outer ring
has slid over the joint. To open the coupling, pull the outer ring
back (3).
Begin connecting the motor and bottom bar (4), continue fitting
the wheels.
To make sure that you have connected the frame correctly, cross-
check it against the images. The battery connection has to be
located to the left of the bottom bar (seen from the direction of
travel) to make sure that the drives can be supplied with power.
Image:
TiCad Goldfinger with
twist-grip control and GRP* wheels,
also available as
TiCad Goldfinger
with dual button control.
READ ME FIRST
TiCad
GOLDFINGER
*Glass-fibre reinforced plastic (PA 6 GF 30)
Congratulations!
You have chosen an excellent product manufactured by TiCad! All
of our high-quality products are carefully handmade at our pro-
duction facility in Altenstadt (Hessen, Germany).
To ensure that you will be able to enjoy your trolley for a very
long time, please take some time to carefully read through these
operating instructions, which contain important information that
will make using your trolley a lot easier.
If you have any further questions regarding the use or care of your
trolley, please contact your TiCad dealer.
We would like to wish you many enjoyable games
of golf and a lot of success! Your TiCad team
2
1
3
4
5
6
7
8
8
10
17
14
18
12
11
12
20
13
13
16
15
9
19
21
3
2
Opening the firm-fix connection
Connecting the firm-fix connection
Motor and bottom bar
4
1
