Choros 4 / Choros 6
User Manual
Page 26 / 29
6. Line In mode
6.1. Line in mode setup
•
Whilst the Choros 4 / 6 is turned off, connect a
3.5mm jack cable to the “Line in” port at the rear
of the speaker and the other end of the cable to
your Android/iOS device. This is to avoid
speaker pop when the speaker is turned on.
•
Hold the power/mode button to turn on. If
performed correctly, speaker will respond by
saying “Power on”. The speaker will then tell you
what mode is currently activated. E.g. Wi-Fi
mode.
•
Short press the mode button until the speaker
responds saying “Line In mode.” The mode light
will also turn green.
•
You can now play music from your device to the Choros 4 / 6 via your source, Spotify etc
