Tianjin Suowei Electronic Technology Co., Ltd.
S100
How to get accurate data?
keep the probe perpendicular to the contact surface and rotate the probe to
remove the air bubble enable the beam of sound to by pass.
How to use the calibrator ?
Put the gel or some water on the probe and keep the probe perpendicular
to the contact surface of calibrator. The two readings is
approx 12mm and
25 mm.
Precaution
The pictures listed in this specification are just for reference. See
actual objects for details.
Improper power supply may cause instrument damage or person
injury.
Batteries of different models cannot be used on this product.
Do not place the scanner in extremely hot places. High
temperature will shorten the service life of electronic components
and some plastic components will go distorted or melted.
Do not put the scanner in extremely cold places. Otherwise
humidity will be brought out when its temperature increases to be
normal, which will cause electronic board damaged.
Please store all the accessories properly. If anything is missing, the
instrument could not be warranted.
Don’t expose the scanner to direct sunlight. The scanner should be
