8
Power-on Password Entering Interface
Power-on Password Enable/Disable
Press the
MODE
button to enter power-on password modify interface. Press the
UP
or
DOWN
button to select Disable or Enable and press the
MODE
button to confirm. The
default value is Enable. If you choose Enable, press the
MODE
button to enter Power-on
Password Modify interface, otherwise exit the power-on password settings interface.
Power-on Password Disable/Enable
Interface
Power-on Password Modify
When the display shows “Password Set, P3”, press the
UP
or
DOWN
button to modify
the value and then press the
MODE
button to confirm digit one by one until the new 4-digit
password is completed.
To store the new power-on password, hold the
MODE
button for 2 s and then exit
settings.
When switching the eBike system on next time, the display will show P1,0000,
please input the new password to power on.
Power-on Password Modify
Interface
◆
Exit settings
In the settings state, press the
MODE
button to confirm the input. Hold the
MODE
button for 2 s to save the settings and then exit the current settings. Hold the
DOWN
button for 2 s to cancel the operating but not saving the settings data, and then return to
previous menu.
■
If there is not any operations in one minute, display will exit the settings state
automatically.
Recover default settings
dEF
means recover default settings. Press both the
UP
and
MODE
button for 2 s to
enter recover default settings
.
Press the
UP
or
DOWN
button to choose Y or N. Y means
that recovers default settings. N means that do not recover default settings. When it is Y,
