4
◆
Switching Push-assistance Mode On/Off
To activate the push-assistance function, hold the
“walk”
button always. The eBike’s
drive is activated at a uniform speed of 6 Km/h.
The push-assistance function is switched off as soon as you release the
“walk”
button on the operating unit.
Push-assistance Mode
■
Push-assistance function may only be used when pushing the eBike. Danger of
injury when the wheels of the eBike do not have ground contact while use the push-
assistance function.
◆
Switching the Lighting On/Off
To switch on the lights (front light, rear light and display backlight) at the same time,
hold the
“+”
button for 2 s.
In the same way to hold the
“+”
button for 2 s again, the lighting can be switched off
at the same time.
Switch On/Off the Lighting
◆
Assistance Level Selection
The level of assistance of the eBike drive when pedaling can be adjusted via the display.
The assistance level can be changed anytime, even during riding.
The default assistance level ranges from level “0” to level “5”.The output power is zero on
Level “0”. Level “1” is the minimum power. Level “5” is the maximum power.
To increase the assistance level, press the
“+”
button until the desired assistance
level is displayed; to decrease the assistance level, press the
“-”
button. The default
value is level “1”.
Summary of Contents for KD51C
Page 1: ......