34
Debugging
1. Before the installing must be pre-set communication protocol, baud
rate, zoom camera
’s protocol and ID code. A system of speed dome
camera, keyboard, and matrix must be used, such as unified
communications and unified communications protocol baud rate,
and ensure that each speed dome camera has a unique same
address.
2. Identification
speed dome cameras’ power lines, communications
lines and video transmission lines, to ensure that the correct
connection.
3. Control room in the center of each speed dome camera debugging,
including: the control of the upper and lower pan/tilt reciprocating
scanning around to see if there is a halt, should not start or should
not stop the phenomenon; aperture control camera focus and zoom
to see if there is image distortion , color cast, such as Focus on the
phenomenon of non-performing; set up and call the preset point to
view the accuracy of the preset points; set up and call a variety of
cruise feature to see the speed dome camera and memory function.
4. Preset point should not be set up at the camera straight on the
location of the sun in order to avoid damage to the camera sensor
devices.
Summary of Contents for TC-D2410-AW
Page 7: ...7 DRAWING ...
