32
PROTOCOL CODE FUNCTION
1.
B01 PROTOCOL
Ⅰ
.To set up cruise tracks
：
[SHOT] + N + [ON]
The LCD displays Input Tour No. N
N: The number of track
ON The LCD displays Track = N1 Sum = N2
N
1
: track number
N
2
: sum of preset positions
Press TELE, the LCD displays No.N3 point
Press preset positions number
Press TELE the LCD displays No.N3 speed 3
Speed lever 1~8 1 stand fast speed
8 stand lowest speed
Then press TELE the LCD displays No.N3 time
Press first time of resorting in the cruise track
N3 the No. of current cruise tracks.
1. Setting 16 preset positions in this cruise track as above, repeat the steps as
above.
2. [TELE] Page up [WIDE] Page down
，
1. When setting the speed and time of No. n to 0, the preset position which are at
n-1 and before n-1 are all effective, but preset position No., speed and time
which are at n+1 and n change to 0 automatically.
2. Option of speed from 1 to 8 are used for confirm the speed which move this
points to another point.
3. Press OFF to save and exit. Move the joystick to exit without saving.
Ⅱ
.To call cruise track
[SHOT] + N + [ENTER] Display
：
Input Tour No.
：
01
Note: Under B01 protocol, if you want to call other cruise tracks, you
must set cruise tracks first and reserve.
Summary of Contents for TC-D2410-AW
Page 7: ...7 DRAWING ...
