2. Fever 3-Beep Alarm Threshold Setup – F1 MENU
•
Default value indicating fever is 100.5°F (38°C)
•
To change default values press trigger to activate unit
o
Press “°C” button and hold for approximately 3 seconds until screen
displays F1
o
Press “M” button to display temperature at which alarm will sound
o
Press “°C” button to increase threshold by 0.2°F (0.1°C)
o
Press “°F” button to decrease threshold by 0.2°F (0.1°C)
o
Press trigger to exit
3. Variation – F2 MENU
To adjust the total variation of your tia NC-9900
•
Press trigger to activate unit
•
Press “°C” button for approximately 3 seconds until screen displays F1
•
Press “°F” button twice until screen shows F2
•
Press “M” button to display current setting
•
Press “°C” button to increase threshold by 0.2°F (0.1°C)
•
Press “°F” button to decrease threshold by 0.2°F (0.1°C)
•
Confirm by pressing trigger
•
Press trigger to exit
•
Note: Default value is +1.2°F (+0.8°C)
(Manufacturer recommends that
you keep this setting)
•
Important Reminder:
Whenever there is a significant change in ambient
(room) temperature, please allow the tia NC-9900 approximately 15
minutes to become accustomed to this change
4. Changing from Body to Surface Temperature Mode – F3 MENU
•
Your tia NC-9900 arrives ready to measure the body temperature of a
human being and is thus set in BODY mode
•
Measurement range for BODY mode 90°F - 109°F (32°C - 42.9°C)
•
You can also use your tia NC-9900 to measure the temperature of an
area or an object, a food, a liquid or a room temperature by changing to
SURFACE mode
