EN
6
OPERATING INSTRUCTIONS
STEP 1:
Fully unwind the mains cable.
STEP 2:
Make sure the Fan Speed switch is
in the OFF (0) position.
STEP 3:
Place the appliance on a smooth,
flat, dry surface, plug in and switch
on at the mains supply.
STEP 4:
Adjust the heat selector to the
desired temperature:
Position I –
Cool.
Position II –
Medium temperature for gentle
drying and styling.
Position III –
Full power, high temperature for
quick drying.
COOL-SHOT -
by pressing this button it is
possible to interrupt the heating
process so that the air can be
mixed according to individual
requirements.
STEP 5:
Switch on the hair dryer by setting
the Fan speed switch to position
(low speed) or (high speed).
USING THE CONCENTRATOR NOZZLE
The concentrator nozzle allows you to target
a concentrated jet of air at specific areas
when styling.
STEP 1:
To fit the concentrator nozzle,
simply push onto the front of the
appliance.
STEP 2:
The concentrator nozzle can be
rotated through 360 degrees as
required.
STEP 3:
To remove, pull the concentrator
nozzle away from the appliance.
