74
TROUBLESHOOTING
Warnings
Servicing
MNB-01 does not contain consumer serviceable components. You are advised not to carry out any kind of
troubleshooting. In case you face any problems, contact the service center. Only authorized service personnel
can repair the equipment.
Antenna and RF cables
Use only MNB-01 antenna and RF cables that have been specifically designed for your terminal.
Unauthorized antennas, cables and cable length modifications, or attachments could damage the device and
may violate the relevant regulations, causing loss or degradation of performance and radio frequency (RF)
energy above the recommended limits. If your MNB-01 gets damaged, please take it to an authorized Service
Partner.
General
• Do not place MNB-01 in a wet area.
• Do not expose MNB-01 to temperatures greater than +55 °C or less than -15 °C.
• Do not expose MNB-01 to moisture, dust etc.
• Avoid placing MNB-01 close to open flames or any source of heat.
• Do not expose MNB-01 to direct sunlight.
• Do not disassemble MNB-01. This will void your warranty.
Care and Maintenance
• MNB-01 is a product of superior design and craftsmanship and should be treated with care.
• The following suggestions will help you to fulfill any warranty obligations and allow you to enjoy this product
for many years.
• Do not store it in hot areas.
• Do not attempt to open it. Mishandling of the device may damage it.
• Do not drop, apply pressure or shake it. Rough handling can break internal circuit boards.
• Do not use chemicals, cleaning solvents, or strong detergents to clean it. Wipe it smoothly with a soft cloth.
• Use only the supplied or approved replacement antenna.
• Ensure DC power supply connections are provided as per specs and do not swap + & - connections.
