29
Making / End a Voice Call
NOTE
Before making a voice call, please make sure MNB-01 has registered the network and signal strength status
indicator should be on (
). There should be at least 2 bars on the signal strength.
To make a call from the Base Terminal, off-hook the handset cradle and dial.
+<country code><phone number> and press
key
or
00 <country code> <phone number> and press
key
NOTE
For voice calls in dial, you may also use ‘+’ by pressing and holding the
key instead of “00” at the beginning
of dialed number string as an alternative(‘+’ <country code> <phone number>).
To end the call, re-place the handset on the cradle.
Receiving a call
When there is an incoming call, the MNB-01 terminal will:
• Ring
• The calling party’s number will be displayed on the screen.
The corresponding name of contact will be displayed if the number is stored in the contacts.
To answer an incoming call, pick up the handset from the cradle or from the analogue phone, if connected.
Adjusting volume during a call
Use Left
/ Right
Function Key adjust the volume.
