THUNDERPOLE T-800, Owner'S Manual, Page: 8 / 12

Frequency band selection / table
Frequency Band Table
8 programmable frequency bands are available, as per the below table :
FREQUENCY BAND
ID CODE
COUNTRY SPECIFICATIONS
(Channels, Operating Modes, TX Power)
E1 ITALY/SPAIN 40CH AM / FM 4W
I2 ITALY 36CH AM / FM 4W
-d GERMANY 80CH FM 4W - 12CH AM 1W
d2 GERMANY 40CH FM 4W - 12CH AM 1W
EU EUROPE/FRANCE 40CH FM 4W - 40CH AM 1W
CE CEPT 40CH AM / FM 4W
-U UK 40CH FM 4W UK FREQUENCIES
40CH FM 4W EU (CE) FREQUENCIES
PL POLAND 40CH AM / FM 4W POLISH FREQUENCIES
Frequency Band Selection / Programming
This Thunderpole T-800 CB radio must be programmed and exclusively used on a frequency band
allowed in the country where the product is used (see below). When radio is switched ON, the
current programmed frequency band code will be displayed for approx. 2 seconds. To program a
different frequency band, proceed as follows :
1) Turn OFF the radio.
2) Whilst pressing the PTT (15) and Down button on the microphone (18) together, turn on the
power using the ON/OFF/VOLUME Control (6).
3) Use the UP and Down buttons (2 & 3, or 16 &18) to select the band.
4) Turn the radio off and then on again, now the display will show the programmed band, and you
will be working on the band you selected.
UK/CE Channel Selection (Frequency Band “U”)
If the UK Frequency band has been selected, all 80 channels available for UK use can be accessed
by using the EU/UK (AM/FM) Switch (7). In EU/AM position the radio will operate on the European
(CE) 40 Channel band in FM mode, and when in UK/FM position the radio will operate on the UK 40
Channel band in FM mode.
Note: To access AM channels on the CE band follow instructions 1 to 4 above and choose CE band,
then swith the AM/FM switch to AM.
- 6 -