(7) BK0086
(6) BK0092
(3) HML2
(4) BK0075
(2) HMF2-8N
(4) BK0075
(3) HML2
(1) HSE2612N
(1) HSE2612N
(2) HMF2-8N
(4) BK0075
Pitch Servo
Throttle Servo
(3) HML2
(2) HMF2-8N
(7) BK0086
(5) BK0094
(1) HSE2612N
75mm
15
17 Servo Installation-Part2
51mm
(1) HSE2612N Self Tapping Screw(M2.6x12).... 8
(2) HMF2-8N Screw(M2x8)................................ 3
(3) HML2 Hex Nut(M2)...................................... 3
(4) BK0075 Linkage Ball.................................... 3
(5) BK0094 Linkage Rod .................................. 1
(6) BK0092 Linkage Rod .................................. 1
(7) BK0086 Ball Link.......................................... 4
On/Off Switch
Gyro Amplifier
Receiver
Battery Pack
(2) BK0106
(1) BE1052
Thunder Tiger TG-8000 piezo
gyro is recommended
(2) BK0106
(2) BK0106
(2) BK0106
On/Off Switch Face Plate
18 Receiver/Gyro Installation
(1) BE1052 Antenna Tube................... 1
(2) BK0106 Double Side Tape............ 2
Thunder Tiger recognizes that there are many brands of radios and gyros to choose from. You are encouraged to
seek the advice of experienced helicopter pilots when making this decision.
Assembly Tip: Remove all the servo wheels prior to attaching the steel
linkage balls. Make sure all linkages are the correct length.
See Engine-Throttle Control Linkage on page 17.
Mount the Steel Link
Ball at 10.5mm(approx
7/16") from the center
of the servo horn for
the throttle arm.
Summary of Contents for Raptor 50 V2 kit
