10
ASSEMBLY / RX, ESC, BATTERY
32.Connect the servo wires to receivers and speed
controller as shown. You will need one servo
extension to connect aileron servo. Use Velcro to
secure battery as photo shown. Secure the RX
and ESC with the furnished Double-Sided tape.
Organize the wires and fix them on fuselage with
tape if necessary.
33.Route the antenna wire to the tail and tape it on
fuselage.
CONTROL THROWS
The following contorl throw of 3D Profile EP is merely
a star ting point for your radio setup and can be
tailored to fit your flying syle.
For All three models the aileron and elevator are of the
same throws but rudder are different as shown below.
Expo 3D & G202
Christen Eagle
Elevator-Low Rate
Aileron-Low Rate
Aileron-High Rate
Elevator-High Rate
Rudder-Low Rate
Rudder-High Rate
Expo 3D
Rudder-Low Rate
Rudder-High Rate
G202
Rudder-Low Rate
Rudder-High Rate
Chrstin Eagle
1"
1"
3/4"
3/4"
1-1/4"
1-1/4"
2-1/2"
2-1/2"
1-1/2"
1-1/2"
1-3/4"
1-3/4"
2-1/4"
2-1/4"
1-1/2"
1-1/2"
1-3/4"
1-3/4"
1-1/4"
1-1/4"
