Thump th-15a Owner'S Manual Download Page 4

Getting Started

The following steps will 
help you set up your 
loudspeakers quickly. 

INITIAL SETTINGS:

1.

  Turn the LEVEL control on the rear panel all the way 

down.

2.

  Set the DIRECT/EQ switch out (DIRECT).

3.

  Turn the POWER switch OFF.

CONNECTIONS:

1.

  Connect the line-level signal from your mixer (or 

other signal source) to the IN jack on the TH-15A 
rear panel (XLR connector).

2.

  Connect the supplied AC power cord to the IEC 

socket on the back of the loudspeaker. Plug the 
other end into an AC outlet properly configured 
with the correct voltage as indicated just below 
the IEC socket.

TURN IT ON:

1.

  Turn the POWER switch ON.

2.

  Start your signal source (tape deck, CD, DAW, or 

whatever), but leave the master level control on 
your mixer down.

3.

  Slowly turn up the LEVEL control on the TH-15A to 

the “U” (unity gain) mark at the center position.

.

  Adjust the master volume on your mixer to a 

comfortably loud listening level. If the volume from 
the speakers gets really loud, really fast, try turning 
down the LEVEL control on the TH-15As a bit. If the 
speakers don’t get loud enough, turn up the LEVEL 
control to achieve a good balance of master 
volume control and loudness from the speaker.

Now that you have your loudspeakers 

working, it’s time to hunker down and read 

the rest of this manual…especially the 

following:

ADDITIONAL TIDBITS OF WIDSDOM:

•  Never listen to loud music for prolonged periods. 

Please see the Safety Instructions on page 2 for 
information on hearing protection.

•   When you shut down your equipment, turn off 

the TH-15A loudspeakers first to prevent thumps 
and other noises generated by any upstream 
equipment from coming out the speakers. When 
powering up, turn on the TH-15As last.

•   Save the shipping boxes and packing materials! 

You may need them someday. Besides, your cat 
will love playing in them and jumping out at you 
unexpectedly. Remember to pretend like you are 
surprised!

•   Save your sales receipt in a safe place.
•   Record the serial number in the space provided on 

page 3, along with where and when you bought it.

Summary of Contents for th-15a

















Reviews: