Thump User Guide
5
Start-up & Shutdown
Thump Start-up
1.
Start with your Thump turned off. That is, all LED lights are off.
2.
Press and hold the S4 button until you see any LED light flash; about 5 seconds.
Immediately release S4!
Holding too long could enter the Thump in discoverable mode,
which is identified by alternating flashing LEDs. See Pairing section.
3.
Wait as Thump goes through various light sequences.
4.
It has successfully connected with a previously paired:
a.
stereo and mono
source when the
red and blue lights flash once per
second simultaneously.
b.
stereo only source when the blue light flashes once per second.
c.
mono
only source when
the red light flashes once per second.
Also, the Bluetooth indicator on the phone will be lighted.
5.
If your Thump doesn’t connect with your phone within one minute, it automatically
turns off. Try pairing again, or see the Trouble Shooting topic later in this guide.
If it doesn’t connect, it will then enter standby mode and the red light will
flash once per second.
When in connection mode and no phone it has been paired
with is located in 1 minute, your Thump will automatically turn off. To connect,
ensure your Thump is within receiving range of your phone.
Thump Shutdown
1.
Start with your Thump turned on meaning any LED light pattern is showing.
2.
Press and hold S4 key.
3.
Red & blue lights flash together quickly and then no lights are on. (~3 Sec)
4.
Release S4
5.
Your Thump is off. No LED lights visible.