Thulos TH-PV3000, Instruction Manual

Page: 12 / 14

Simple Repair Methods
Failure Possible Reasons Measurement
Not enough heat or Too heat
Rotate thermostat dial button
improperly
Correct Thermostat dial Button in
position
No steam produces
Check if the Thermostat dial has
been set towards the steam range
Adjust the thermostat dial as per
steam range
Check if the steam regulator has been
set towards the steam position
Set steam regulator towards the
steam range
No or too little water in box Fill water into the box
Leaking water from Soleplate
Set the thermostat dial out of steam
range
Set the thermostat dial as per
steam range
The heat is still not enough
Open steam button only after the
indicator light goes off
The water is over than max position Pour out the remaining water
Little Steam
Check if the steam regulator is in
proper location
Set the steam regulator to the
proper location
Steam hole or box is blocked Clean hole with distilled water
Too little water in the box Fill water into the box
No Spraying
No enough pressure or air inside
Press the spray nozzle by hand,
and push the spray button several
times continuously
No or little water in the box Fill water into the box
After the above-mentioned methods to repair iron, if it still cannot come to work normally, please send to our
special repair agent for repair.
Note: Any change made to the product, no obligations to inform you separately.