Thulos TH-PV3000, Instruction Manual

Page: 11 / 14

Anti Drip
With a bimetal assembled inside the iron, which can close the steam when the iron soleplate becomes very low, so
water leakage will never happen with this features.
Auto Shut-off
When the iron is plugged in,the indicator light will light steadily,indicating that there is power to the iron,if you
leave the iron unattended:
(a) In a horizontal position without moving ir,or accidentally tip the iron over,it will automatically stop heating
after 30 seconds. The indicator light will blink to let you know that the iron has stopped heating.
(b) In a vertical position(on its heel rest)without moving it,the iron will automatically turn off after 8 minutes. The
indicator light will blink to let you know that the iron has stopped heating.
Type of Fabric and Thermostat Dial Form
Caution: Please note that on the label means that this article may not ironed.
Instructions on Label Type of Fabric Thermostat dial
Nylon
Silk
MIN
MAX
Wool
Cotton
Linen
Caution: If the fabric consists of various kinds of fibers, always select the lowest ironing temperature of the
composition of those fibers.
Cleaning and Maintenance
Before cleaning, remove the plug from the socket and allow the iron to cool down sufficiently.
1. Wipe off the soleplate with a damp cloth and a non-abrasive (liquid) cleaner.
2. If the fiber is adhered to the soleplate, use a damp cloth with vinegar to wipe off the soleplate.
3. Never use strong acid or alkali in order to avoid damaging the soleplate.
4. If the scale blocks the steam hole, please remove the scale with toothpick; do not damage the surface of
soleplate.
5. Stand the iron on its end and let it cool down sufficiently, and meantime pour any remaining water out of
the box, set the steam regulator to position “O”.
EN
GLIS
H