PROBLEM
POSSIBLE CAUSE
POSSIBLE SOLUTION
The device will not
heat up.
The device is not
connected
to
the
mains power supply.
The temperature is
set too low.
The fuse has blown.
Plug in and switch on
the device at the
mains power supply.
Increase
the
temperature
using
the
temperature
control dial, ensuring
that the fabric’s care
instructions
are
followed.
Replace the fuse with
one of the same
rating.
No steam is being
emitted from the
device.
There is insufficient
water in the water
tank.
The pump is still
drawing water from
the water tank.
Fill the water tank
following
the
instructions in the
section
entitled
'Filling
the
Water
Tank*.
Press and hold the
steam button a while
longer to allow the
water to pump into
the iron; this should
takes approximately 1
minute.
Excess
water
is
dripping from the
ceramic soleplate.
This is condensation
inside the ceramic
soleplate.
Allow the device to
heat
up
to
the
selected temperature
before using any unit.
Hose
makes
a
buzzing noise.
The hose is tangled.
Untangle the hose.
