___________________________________________________________________________
www.thriveagritech.com
800-205-7216
9
1)
Unpack the suspending kit (SKIT-BD) clips and cables.
2)
Loosen of the cable screws for each cable and adjust the length of the cables so the lights will
hang at the desired height above the canopy. The cables are normally all set to the same length.
After setting the cables to the appropriate length, tighten the cable screws to lock in place.
Figure 9
3)
Attached the suspension clips to the cables using the provided screw (Figure 10).
Figure 10
4)
Secure the suspension clip & cable assemblies to the mounting structure (e.g., Unistrut, eye
bolts, hooks, etc.) at the positions above the canopy as specified in the lighting design. The cable
assemblies should be positioned so that two (2) suspension clips can attach to the light bar
approximately 6
”
from each end of the light.
5)
Attach the Boost or Infinity 2.0 light bar to the suspension clips (Figure 11).
Figure 11
Suspension Clip
Cable Screws
