Hook Up | Transaction Desk
5
Instructions
Continue to fasten the worksurface to
the frame using the small L brackets
and provided #8 x 7/8" Panhead
screws. The quantity of screws will
depend on the length and depth.
Use a power drill as there are no
pre-drilled holes for this step.
Lower the Transaction Counter into
place centered over elevated frame.
Align the touch-points and fasten the
surface to the transaction bracket using
the provided 5/8" Panhead screws.
Ensure you have the correct screws,
anything longer than 5/8" will damage
the top.
Finally, adjust the levelers and tighten
any remaining screws.
5
6
Qty: 10
5/8" Panhead
#8 x 7/8" Panhead
Summary of Contents for Hook Up
Page 1: ...Hook Up Transaction Desk ...
