Hook Up | Transaction Desk
4
Instructions
Flip the parts from Step 2 so the feet
are on the ground. Slide the Transaction
Leg into the Frame slots.
Fasten the legs to the frame using the
provided M6x10mm flathead screws.
Proceed with tightening ALL M6x10
screws equally around the frame.
Lower the Main Worksurface into place
centered over the frame. Verify all leg
tubes are equal distance from surface
edges (approximately 1/8" overhang).
Apply one #8 x 7/8" Panhead screw on
each corner leg to start.
Once the surface is centered and in
place with 1 screw per leg, fasten the
remaining screws.
3
4
Allen Key
M6x10mm
Qty: 8
Qty: 10
#8 x 7/8" Panhead
Summary of Contents for Hook Up
Page 1: ...Hook Up Transaction Desk ...
