Thrane&Thrane TT-3084A Sailor Fleet77, User Manual, Page: 99 / 168

Menu System Operation
4
either Yes or No for each of the three RJ11 2-wire
connectors. The item Ring Tone can be used for choosing
a common 2-wire ring tone among eight ring tones. The
ring tones are described with the two symbols ‘#’ (sound)
and ‘ ‘ (no sound). Choose the settings by pressing

and press

leave the menu.
The fifth menu item is Pending Time and this value is by
default set to 30 seconds. The Call Waiting Notification will
continue for a number of seconds corresponding to the
value of Pending Time. If the user chooses to ignore the
notification for a longer period the incoming call will be
ignored. Enter a value and press

to save when leaving
the menu. Press

to leave the menu without saving.
The last menu items are Caller #1-5 and each of these
can contain a phone number that is allowed to interrupt the
MPDS sessions if this is enabled in the menu item Limit
Calls
. Each number can be individually associated with a
ring tone and with the 4-Wire handset and/or a number of
the RJ11 2-Wire connectors. Configuration is done as
described in the menu items Handset and RJ11.
May 2005 91