Thrane&Thrane TT-3042D, Manual Manual, Page: 24 / 31

22 Operation Operation
1.5 1.5
Connectors Connectors
Page Page 44 7Jul98 7Jul98
2.1.8 Paper Feed
Paper feed is activated by the FEED button. When paper Paper
diode is turned on or flashing the feeding distance is increased.
2.1.9 Paper Load
Use thermal paper rolls with width 112 mm (4.4") and max outer
diameter 48 mm (approximate length 24 m). Use preferable
high speed thermal paper for printer.
To load paper do as follows.
1. Open roll holder and remove remaining roll kernel.
2. Press the Paper Feed switch to remove remaining paper.
3. Take off the sealing paper on new paper roll and pull out 50
to 60 mm.
4. Cut the edge of end of new roll to form an arrow.
5. Insert the edge of the paper in the paper feeding slot on
printer and press Paper Feed switch. After a while the paper
edge comes out.
6. Insert the paper roll in holder and close the roll holder.
2.1.10 Paper Saving
For paper saving the TT-3042D cuts away succeeding blank
lines. A maximum of two blank lines are allowed after each
other. In 40 chars per line mode succeeding spaces are also cut
away.