Thrane&Thrane TT-3042D, Manual Manual, Page: 23 / 31

1.5 1.5 Connectors Connectors
22
Operation Operation
7Jul98 7Jul98 Page Page 33
2.1.4 Mail Indicator
The Mail diode indicates that mail has been received by the
transceiver. The Mail diode turns off when the OK button is
pressed.
2.1.5 Call Group Reset
The OK button is used as a single reset button for all call groups.
If an EGC/Mail indicator is turned on, pressing OK button causes
an receipt to be send back to the transceiver.
2.1.6 Audio Indicator
The audio indicator gives a notice to attract attention when
Remote Alarm status is changed.
The sounder also gives a notice when communication status to
Capsat transceiver is changed, printer error or printer paper
empty is detected. It also turns on when an alarm request has
been send to the transceiver.
The sounder timeout option, set by the DIP switch, must not be
enabled when the TT-3042D is used as a remote alarm. The
sounder timeout option must only be enabled when the remote
alarm is used for printing only. When the timeout option is set
the sounder will not be turned on for more than 10 seconds.
2.1.7 Dimmer Control
Diode light level and text background light level is controlled
by pressing the OK button and then pressing the FEED button a
number of times.