Thrane&Thrane SAILOR SP3515 User Manual Download Page 28

Page: 28 / 56

Configuring the radio

List of configuration settings

The following settings are available in configuration mode.

Name

Values

Description

LIGHT

MAN

Only

Light/Lock

button activates the backlight.

KEY

All keys and buttons, except PTT and volume
control, activate the backlight.

CHAN

INT

International channels.

US channels.

Canadian channels

Inland waterways. ATIS and ATIS killer is
enabled. All multiple watch is disabled.

ALT

Custom defined.

BEEP

MAX

Status click/beep sound on key press, long
press (settings/programming saved) and
battery alarm. Maximum level.

MIN

Status click/beep sound on key press, long
press (settings/programming saved) and
battery alarm. Minimum level.

OFF

All beeps off.

VER

X.XX.XX

Software version. Read-only.

BAT

X.XX

Battery voltage (V). Read-only.

TEMP

XX.X

Temperature (

C). Read-only.

0703

Summary of Contents for SAILOR SP3515

























































Search results

Summary of Contents for SAILOR SP3515

Reviews:

Related manuals for SAILOR SP3515

Brands by name

Popular brands

Thrane&Thrane SAILOR SP3515, User Manual

Search results

Summary of Contents for SAILOR SP3515

Reviews:

Related manuals for SAILOR SP3515

Brands by name

Popular brands