Thrane&Thrane SAILOR 700 VSAT, User Manual

Page: 31 / 94

SAILOR 700 VSAT User Manual
23
Chapter 3 - Configuration
10.
Repeat steps 8 and 9 to set the remaining digits of the range of azimuths
for zone #1. Once you have set the entire range, the cursor disappears
from the display.
11.
Press ACCEPT. The display shows the current azimuth range for RF
radiation hazard zone #2.
12.
If you wish to set up a second RF radiation hazard zone, repeat steps 7-11.
(Be sure the second zone does not overlap the first.) Otherwise, press
MENUS. The display shows the current setting for Transmit Inhibition
(“XMT IN ZONES”).
ZONE 1= 300-000
CHANGE ACCEPT
ZONE 1= 335-025?
CHANGE ACCEPT
ZONE 2= 000-000
NEXT ITEM CHANGE
Make sure “XMT IN ZONES” is set to
NO
, so the ADU will not transmit
whenever it points within one of your configured RF radiation hazard
zones. If “XMT IN ZONES” is set to YES, the zones are disabled,
allowing the ADU to transmit within them.
IMPORTANT!
XMT IN ZONES= NO
NEXT ITEM CHANGE