Thrane&Thrane SAILOR 6248 VHF, User Manual

Page: 31 / 66

Chapter 2: Operation
Scan 15
22222
Operation
selector knob. If there is a signal in one of the watched channels, the display
shows the channel in which the signal is received. For instructions how to
setup
TRIPLE WATCH see Radio setup on page 19.
To start the watch function press the key DW . The radio enters the
watch mode and the text WATCH with the channel numbers watched
is shown below the current channel number.
To stop the watch function press the key DW again or PTT on the speaking
device.
Scan
The radio has a scanning function for tagged voice channels. Any available
voice channel, including weather and private channels, can be tagged and
added to the scanning sequence. As default the radio scans with priority
scanning of channel 16. If a signal is received while in any scanning mode,
only channel 16 continues to be watched.
If there is a signal in one of the scanned channels, the display shows the
channel in which the signal is received. If PTT is pressed while scanning, the
scanning stops, the radio is tuned into the displayed channel and transmission
starts immediately on the displayed working channel.
To start scanning press the soft key SCAN . The
SCAN menu is shown. Press START to start
scanning. To leave the SCAN menu, but not
the scanning procedure, press
EXIT .
To stop scanning press STOP , QUIT if not in the
SCAN menu, or press PTT on the speaking
device.
To tag a channel for scanning turn the selector
knob until the wanted channel is in the
display. Then press the soft key
TAG . The
display shows the channel number and the
word
TAG at the right side of the display.
EXIT
START
TAG
FILTER
INT
INTERSHIP/PORT
EXIT
STOP
TAG
FILTER
INT
SCANNING[16]