Thrane&Thrane SAILOR 6222, User Manual

Page: 53 / 92

Chapter 2: Operation
Setup 39
22222
Operation
• DSC call logs
• System setup
• Controller setup
Accessing a setup page
To change a setting in one of the SETUP pages, do as follows
1. Press the soft key SETUP . If it is not in the display, press the soft key MORE
until SETUP appears.
2. Press the arrow soft key or to advance to SETUP page you want to
edit.
3. Turn the selector knob to go to a setting, then press the selector knob to
change the setting.
4. Press EXIT to return to normal radio operation.
Radio setup
Parameter Description
Scan Hang
Time Scan hang time, in seconds on an active receiving working channel.
The time is measured from the signal is detected. The radio remains
on the channel for the set time interval, if a signal was detected.
OFF : Resumes scanning when signal disappears (default)
4, 6, 8, 10: Hang time in seconds.
Scan
Resume Scan resume time, in seconds. When the programmed time of
inactivity has elapsed, and when watch/scan has been aborted
using a press on PTT, or after power-up, scan or watch is resumed.
OFF : Automatic resume is deactivated (default)
3, 6, 10, 15, 20, 25, 30: Resume time in seconds.