Thrane&Thrane SAILOR 6222 User Manual Download

Page: 17 / 92

Chapter 1: Introduction

VHF radio with DSC Class A

11111

Introduction

SAILOR 6222 VHF DSC display

The picture shows the display
after start-up. The display holds
various fields of information,
depending on the currently
selected function.

1. Functions you can select with

the soft keys. If there are more
than 4 functions in the list
press the soft key

MORE

display further functions.

2. Current working channel.

System property icons

with information relevant for the currently selected

functions.

4. Channel properties next to the currently selected VHF channel (if any).

Service line

containing current temporary information relevant for the

current channel or function.

6. Current state: RX or TX.

DSC window

with DSC information (MMSI number, position information

and UTC time of position and origin), or specific information relevant to
other functions, e.g. Replay, etc.).

For a detailed description of the information shown for each of the functions
available see the chapter

Operation

on page 9.

CALL

ALERT

DROBOS

MMSI:123456789

INT

LOC LO

DISTRESS/CALL

N 12°34.5678

E 123°45.6789

22:07

GPS

Summary of Contents for SAILOR 6222





























































































Search results

Summary of Contents for SAILOR 6222

Reviews:

Related manuals for SAILOR 6222

Brands by name

Popular brands

Thrane&Thrane SAILOR 6222, User Manual

Search results

Summary of Contents for SAILOR 6222

Reviews:

Related manuals for SAILOR 6222

Brands by name

Popular brands