MAKING A USB CONNECTION
To make a USB connection, do as follows:
NOTE: If it is the first time you connect a computer to the terminal using USB, you
have to install a driver first. Insert the Thrane & Thrane CD ROM provided with your
EXPLORER™ 527 into the CD ROM drive of your computer and install the EXPLORER™
527 USB driver.
1. Connect the USB cable between your computer and the EXPLORER™ 527.
The connector on the EXPLORER™ 527 is a USB Type A connector.
2. Start up the EXPLORER™ 527 as described in the beginning of this document.
3. Create a dial-up connection.
In Windows XP, a dial-up connection is created as follows:
a. Select
Connect To
from the Start menu.
b. Select
Show All Connections
and open the New Connection Wizard.
c. Go through the wizard. When you are asked for a phone number, type:
*
98 #
for an Internet connection, or
*
99
# for a connection to the web interface.
d. When you have finished, close the New Connection Wizard.
4. To connect to the Internet or to the web interface, open the dial-up connection.
You are now ready to browse the Internet, check e-mails, send files etc.
32631-exp527-GetStarted-NOILL-PMS 22/06/06 9:23 Side 10
