EXPLORER 122
User Manual
98-150578-A
3-11
Port Forward Assignments
Any currently active port forwarding assignments will be shown in the Port Forwarding
Assignments table (Figure 3-11).
To add a port forwarding configuration, enter the following information into the Port
Forwarding table:
1.
Name – Set to the logical name of the service being forwarded. This name must not
contain any white space and should consist of alphanumeric characters, hyphens or
underscores.
2.
Incoming Port – Set to the port number of the service to be forwarded, such as 21 for
FTP.
3.
Protocol – Select between UDP/TCP/Both.
4.
Server IP – Set to the IP address, in dot notation, of the host that the packets will be
forwarded to.
5.
Server Port – Set to the port number on the Server IP that the packets will be sent to.
This port can be the same as the Incoming Port, but does not need to be.
6.
When complete, click Add and the assignment will show up in the Port Forwarding
Assignments shown in Figure 3-11.
Figure 3-11. Port Forwarding Pane
3.4.4
Wireless LAN Interface
The WiFi interface pane is used to configure your wireless access point interface for the
WLAN (Figure 3-12).
